Details on toggle switch gear

 

Dongguan toggle switch in gear on some of the details need to be described to you, the following is the details.

Dongguan toggle switch is generally composed of three parts: metal shell, reed plastic bracket and switch plate. The insulating base of the switch plate is generally fiberglass plate, on which two rows of cut-in fixed contacts are crimped; the plastic bracket is provided with small grooves in which snap in sliding reed is fixed correspondingly; the metal shell fixes the reed plastic bracket and switch plate together. When the switch is toggled, the plastic bracket drives the reed to slide on the fixed contact plate of the switch plate, and the positioning ball and spring make the switch move and position accurately, and ensure that it will not be dislocated under certain vibration.

Toggle switch is a kind of component that controls the on or off of the switch by changing the contact point by turning the plastic handle.

The commonly used gears of Dongguan toggle switch are: 1 pole 2 position, 1 pole 3 position, 2 pole 2 position, 2 pole 3 position, 4 pole 3 position, 4 pole 4 position, 10 pole 3 position, 4 Pole 10 position, etc. Among them, multi pole multi position switches with more than 3 poles are mainly used for band conversion. Some band switches can be as many as 10 bits and can change more than 10 switch gears.

The toggle switch is widely used in the field due to its small volume and light weight, such as:

The rotating screen of digital photo frame, gravity sensing of mobile phone, anti-theft equipment and intelligent system. But the toggle switch also has its shortcomings, there are angle restrictions, there must be a certain angle to trigger the toggle switch. Therefore, there is still a part of mercury switch, the demand for toggle switch has been on the rise, the market prospects are good.