Turn-on switch needs to be manufactured for testing

 

The switch needs to be tested when it leaves the factory. How to test it? This requires us to pay more attention to learning and understanding, and testing is also a way to improve quality.

Switch is something we often touch in our daily life. It is a kind of part. If it is a single look, it may be insignificant, but if it is put into the machine, its function will be revealed. There are switches in many of the tools we use everyday. They are basically toggle switches. The ordinary switch is totally different, because its style is very unique, specifications are also very different, there are very large specifications, there are smaller specifications, we call it the micro-switch, this kind of switch is also very popular, sold in the shop is very good, and the price of this switch is not particularly high, so it has both economic and affordable characteristics.

For people, it is also useful to understand the switch, because when we buy the switch, we need to know its characteristics, and then according to their own needs to choose different switch, which is the best. The switching switch has to be tested again and again in production. How do manufacturers test the switching switch?  Now let's take a look.

In fact, there are many tests that need to be done for the toggle switch. Abrasion resistance is the basic attribute of the toggle switch. Only wear resistance can increase its service life and make the toggle switch use longer. If the toggle switch breaks down after several wears, then its cost performance ratio is very low, we are the most. Well, don't buy this kind of cost-effective base switch, because they are not worth it, which requires manufacturers to strictly test in production, can't allow any unqualified switch to go on the market, because it will affect the image of manufacturers, will also leave a bad impression on consumers, this manufacturer's future sales may be very poor.

The second thing we need to do is to test the weldability. This test is also very necessary. Only after passing this test can the switch be used. Because the switch needs to be welded, a simple switch can not be used normally. It must be welded with other materials to play its role, otherwise it can not be used. Fixed, of course, can not play its role, so the weldability also needs to be tested. When testing the weldability, we need to pay attention to many aspects, especially the quality of the toggle switch. If the quality of the toggle switch itself passes through, then it is not difficult to pass the test. If the quality of the toggle switch itself is not very good, then it will be difficult to pass the test. This has become a hard regulation, many people know, especially in the case of the toggle switch itself. People with rich experience in this field.